FADER_4
FADER_4 is a hackable bank of 4 motorized faders. It runs on 5V through a DC barrel connector and has USB and Ethernet connections.
Our open source firmware for FADER_4 is called FADER_X. It includes a handy webpage, hosted from the FADER_4, that you can access to change its behavior. It’s available on Github, along with instructions for updating and configuring it.
With FADER_X firmware, FADER_4 can control (and be controlled by) all sorts of devices, including:
USB MIDI for applications such as vMix
QLab (UDP OSC)
ETC Eos (TCP OSC)
X32/M32 (UDP OSC)
DiGiCo (UDP OSC)
Since it’s built on the Teensy 4.1 development board, it’s possible to write new custom software to make FADER_4 behave *exactly* how you want.
Includes
FADER_4 Control Surface
Teensy 4.1 preinstalled and programmed with FADER_X firmware
5V 4A power supply with US-style plug
3’ Micro USB Cable
FADER_4 is a hackable bank of 4 motorized faders. It runs on 5V through a DC barrel connector and has USB and Ethernet connections.
Our open source firmware for FADER_4 is called FADER_X. It includes a handy webpage, hosted from the FADER_4, that you can access to change its behavior. It’s available on Github, along with instructions for updating and configuring it.
With FADER_X firmware, FADER_4 can control (and be controlled by) all sorts of devices, including:
USB MIDI for applications such as vMix
QLab (UDP OSC)
ETC Eos (TCP OSC)
X32/M32 (UDP OSC)
DiGiCo (UDP OSC)
Since it’s built on the Teensy 4.1 development board, it’s possible to write new custom software to make FADER_4 behave *exactly* how you want.
Includes
FADER_4 Control Surface
Teensy 4.1 preinstalled and programmed with FADER_X firmware
5V 4A power supply with US-style plug
3’ Micro USB Cable
FADER_4 is a hackable bank of 4 motorized faders. It runs on 5V through a DC barrel connector and has USB and Ethernet connections.
Our open source firmware for FADER_4 is called FADER_X. It includes a handy webpage, hosted from the FADER_4, that you can access to change its behavior. It’s available on Github, along with instructions for updating and configuring it.
With FADER_X firmware, FADER_4 can control (and be controlled by) all sorts of devices, including:
USB MIDI for applications such as vMix
QLab (UDP OSC)
ETC Eos (TCP OSC)
X32/M32 (UDP OSC)
DiGiCo (UDP OSC)
Since it’s built on the Teensy 4.1 development board, it’s possible to write new custom software to make FADER_4 behave *exactly* how you want.
Includes
FADER_4 Control Surface
Teensy 4.1 preinstalled and programmed with FADER_X firmware
5V 4A power supply with US-style plug
3’ Micro USB Cable
3D Printable Enclosure
Print your own case! Designed for easy FDM (filament) printing.
Components List
All the parts that go into a FADER_4, and where to buy them.
Source Files
Motherboard - Gerber, JLCPCB BOM, JLCPCB PnP
Cover Plate - Gerber
Bottom Plate - Gerber
3D Printable Fader Knob
Print custom knobs in any color you like. You’ll absolutely need an SLA (resin) printer to get the fine detail. This model works on many professional sound consoles too!